Sharkoon REBEL C70M RGB Full Tower Black, Wood

With its elegant wood design on the front panel, the Rebel C70M RGB adds a stylish touch to any gaming room, living room or study. Apart from a striking appearance, modular installation options allow space for up to eleven 120 mm fans or two radiators. And along with perforated surfaces in and around the case, an optimal cooling performance is ensured even for high-end setups. In addition, the continued efficiency of the PC case is supported by its future-proof USB-C and TRRS connections.

Designed for Elegance and Perfomance
Behind the Rebel C70M RGB’s front panel with its chic wood design, three 120 mm PWM fans with RGB illumination are already pre-installed. Another 120 mm RGB PWM fan is pre-installed on the rear panel to extract the warmed air out of the case. In total, eleven 120 mm fans will find room in the case: In addition to the four pre-installed fans, three more can be mounted next to the mainboard tray and another behind the mainboard tray, while three fans can be installed under the top panel. And to keep the inside as clean as possible, there is a removable, easy-to-clean dust filter on the bottom panel of the case.

Easy Expansion of the Airflow
To easily expand the airflow and cooling performance, the Rebel C70 has a mounting frame in the top of the case. This can be equipped with up to three 120 mm fans or a radiator up to 360 mm and then easily reinserted under the top panel. If the cooling is to be expanded even further, up to three additional 120 mm fans or a 360 mm radiator can be installed next to the mainboard tray when the modular section of power supply tunnel has been removed.

Equipped for Modern Graphics Cards
The Rebel C70 has a graphics card holder with a rubberized surface to allow for the optimal use of even heavy graphics cards. However, as with all Rebel series cases, the Rebel C Series Vertical Graphics Card Kit 4.0 is an option that is available for the vertical installation of the graphics card in the case.

Spacious Interior
Apart from the fans, the required HDDS and SSDs can also be modularly installed. These can be placed on the mounting bracket and inserted as a bundle behind the mainboard tray. The Rebel C70 has space for up to three 3.5" HDDs or up to three 2.5" SSDs. In addition, there is enough room for graphics cards with a maximum length of 40 cm as well as a CPU cooler with a height of up to 16,5 cm. A power supply unit with a maximum length of up to 27 cm can also be accommodated.

Future-Proof Connections
As far as connectivity is concerned, the Rebel C70 provides for a high degree of compatibility well into the future. The top panel of the case therefore has a USB-C port for mobile devices as well as a TRRS port for audio and microphone. Also, there are USB 3.0 ports available to connect two further devices.