Nanoxia Deep Silence 4 Mini Tower Anthracite

The Deep Silence 4 is the most compact case from our next generation of silent PC cases. Despite its compact measurements, the Deep Silence 4 can be fitted with current CPU-coolers and extra-long graphic cards. Two modular HDD-cages guarantee the best possible compatibility for your most demanding projects.

Prominent features of our Deep Silence case series:

- Classic design - Made in Germany
- Particularly quiet thanks to its integrated sound dampening system and focused design
- Highly efficient, stealthy ventilation system
- Maximum functionality and adaptability

Two 5.25 inch bays for external drives can be found behind the foam insulated front door in the upper part of the case front, as well as a 2-chanel fan control and the reset button. The door is equipped with a magnet to ensure a fast closing and easy opening.

On the front of the top cover you can find the I/O-panel. It offers 2 x USB 3.0, 1 x USB 2.0, as well as Mic and Audio connectors. This ensures that appropriate devices can be connected quickly and easily.

You can mount Micro-ATX and Mini-ITX motherboards in the Deep Silence 4 case. Thanks to the modular HDD-cages you can install VGA-cards with a maximum length of up to 395 mm. When using all the HDD-cages, you can use cards with a length of 365 mm.

Almost noiseless

A guiding principle in the development of the Nanoxia case series has always been the requirement to create cases as quiet as possible at the lowest system temperatures.

The Deep Silence 4 is fully soundproofed. Features like the decoupled mounting of PSU and hard disk drives, as well as anti-vibration case feet are part of the sound insulation concept as well.

Our compact tower is manufactured from high grade steel. By using the highest quality materials, optimal noise insulation is ensured while providing a very stable case.

The two preinstalled 120 mm fans from the “Deep Silence” series are an important part of the noiseless concept. The quiet-running fans are designed for the best possible compromise between cooling performance and low noise levels. The Tower is also equipped with a 2-channel fan controller, as is standard for the Deep Silence case series.

A Nanoxia VentCover is used to close the optional opening for a 120/140 mm fan under the top cover. Thus, the user can at any time choose between improved cooling of the system by incorporating further case fans or improved sound insulation, by leaving the VentCover in place.

Intelligent ventilation system

Two 120 mm Deep Silence fans are included in the Deep Silence 4. One vetilator is mounted behind the case front, the second at the rear of the tower. At 14.2 dB(A), the Nanoxia Deep Silence 120 mm fans generate an air flow of about 60.1 CFM and a static air pressure of 1.27 mm H²O.

A 120 or 140 mm fan can be mounted under the top cover. Front and bottom of the case are equipped with easy to clean dust filters.

The integrated fan control allows the user to optimize settings to balance low system temperatures and the lowest possible noise levels, even at a full fan assembly.

Watercooling Ready

After removing the upper two HDD-cages, you can fit a water cooling solution with a 120 mm radiator behind the front. Another 120 mm radiator can be mounted at the back of the case.

Two additional rubber hose guides for external water cooling solutions can be found on the rear side.

Versatile Features

The Nanoxia Deep Silence 4 offers a variety of very convenient product features:

Behind the case front a special swiveling bracket, equipped with a dust filter, which holds the preinstalled 120 mm fan. Once you remove the front panel, a simple push on the holding frame (it works using the push-pin principle) releases the anchoring. The flap can be opened to remove and clean dust filter and fan.

Two modular HDD cages for up to 5 hard disk drives are included in the Deep Silence 4. Another, permanently fixed cage for a single HDD brings the HDD-capacity of the case to six. For a maximum variability, the modular HDD-cages can easily be removed.

Due to this versatility, the installation of longer graphics cards up to a maximum length of 395 mm is possible. By removing unneeded HDD cages, the serial front fans can also more effectively cool the VGA cards.



Mounting holes for the installation of an additional 2,5 inch drive bay can be found on the left of the modular HDD-cages, perfect to add an SSD.

The hard drives are installed in special mounting carriages, which are designed to accommodate both 2.5" HDD / SSD as well as 3.5" HDD. Screws with rubber suspension are used to hold the drives in place.

CPU-coolers with a maximum installation height of up to 160 mm can be fitted in the Deep Silence 4.