PLANET Long Reach PoE Solution enables all enterprises and network service providers to set up an IP infrastructure in a remote location where 802.3af/at PoE compliant powered devices can receive both data and power via PLANET switches, and PLANET LRP extenders and injectors over a long distance but not limited to the normal 100 meters.
Intelligent Long Reach PoE Switch on Coaxial-based Network PLANET LRP-422CST, a brand-new Multi-channel Long Reach PoE Switch, features an extended Ethernet and PoE networking of up to 1 kilometer over the existing coaxial cables going to multiple PoE compliant devices. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 4 BNC ports with Long Reach PoE Injector function, 2 Gigabit copper ports and 2 extra 100/1000BASE-X SFP fiber slots. Each of the BNC ports provides 36 watts of power with a total power budget of up to 150 watts. As an advanced PoE switch, the LRP-422CST features intelligent PoE functions to improve the availability of critical applications. It provides a quick, safe and cost-effective PoE network solution to upgrading the existing coaxial cable infrastructure from the analog system to the HD IP surveillance system.
Environmentally Hardened Design With IP30 aluminum industrial case protection, the LRP-422CST provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. It also possesses an integrated power supply source with wide range of voltages (48 to 56V DC) for worldwide high availability applications requiring dual or backup power inputs. Being able to operate under the temperature range from -20 to 75 degrees C, the LRP-422CST can be placed in almost any difficult environment.
Multi-channel Long Reach Power over Ethernet To support the enterprises in easily building a multi-channel and centrally-controlled Long Reach PoE system, the LRP-422CST works with the Long Reach PoE Extenders, LRP-101CE, via its 4 BNC ports being the Long Reach PoE injectors for all connected LRP Extenders. Each of the BNC ports features long range data and power transmission for distance up to 1,000m (3,280ft) over coaxial cable to the LRP Extender, and another 100m over Ethernet cable to remote PoE IP camera, PoE wireless AP or access control systems complied with 802.3af/at PoE.
Centralized Power Management With the centrally-managed 150-watt PoE budget, the LRP-422CST eliminates the need for an additional remote site power while allowing a single power source to provide power to both LRP extenders and the PoE powered devices at long range. The Long Reach PoE capabilities provided help to reduce installation time and deployment costs for network devices as a result of freeing from restrictions of power outlet locations.
Daisy-chaining Multiple Nodes PLANET Long Reach PoE solution can easily build a power system for centrally-controlled IP cameras in a high availability network infrastructure. It gives users the flexibility to expand small area network with BNC T-connector for sharing four nodes per port when needed, making the LRP-422CST with 4 BNC Long Reach PoE Ports an ideal support for up to 16 PoE powered devices.
Built-in Unique PoE Functions for Powered Devices Management As a managed PoE switch for surveillance, wireless and VoIP networks, the LRP-422CST particularly features the following special PoE Management functions to accomplish a highly-efficient Long Reach network: - PD Alive Check - Scheduled Power Recycling - PoE Schedule - PoE Usage Monitoring
Intelligent Powered Device Alive Check The LRP-422CST can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the LRP-422CST will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.
Scheduled Power Recycling The LRP-422CST allows each of the connected PoE IP cameras or PoE wireless access points via the LRP-101CE Long Reach PoE Extender to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or wireless AP crash resulting from buffer overflow.
PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the LRP-422CST can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.
PoE Usage Monitoring Via the power usage chart in the web management interface, the LRP-422CST enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities.
IPv6/IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the LRP-422CST helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.
Robust Layer 2 Features The LRP-422CST can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the LRP-422CST allows the operation of a high-speed trunk to combine with multiple ports such as an 8Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 Protocol included to help discover basic information about neighboring devices on the local broadcast domain.
Efficient Traffic Control The LRP-422CST is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.
Powerful Security PLANET LRP-422CST offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the Protected Port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port Security function allows to limit the number of network devices on a given port.
Advanced Network Security The LRP-422CST also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now build highly-secure corporate networks with considerably less time and effort than before.
Friendly and Secure Management For efficient management, the LRP-422CST is equipped with console, Web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the LRP-422CST offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet and the console port. Moreover, the LRP-422CST offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.
Flexibility and Long-distance Extension Solution The LRP-422CST provides two Gigabit TP interfaces supporting 10/100/1000BASE-T RJ45 copper to be connected with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through another two dual-speed fiber SFP slots, it can connect with the 100BASE-FX/1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). The LRP-422CST is well suited for applications within the enterprise data centers and distributions.
Intelligent SFP Diagnosis Mechanism The LRP-422CST also supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage, thus increasing the efficiency of network management. More information: Security | Access Control List (ACL) | Yes | ![](/p.gif) | IGMP snooping | Yes | ![](/p.gif) | Security algorithms | 128-bit AES, SNMPv3, SSH, SSL/TLS | ![](/p.gif) | MAC address filtering | Yes | ![](/p.gif) | SSH/SSL support | Yes | ![](/p.gif) | Loop protection | Yes | ![](/p.gif) | BPDU filtering/protection | Yes | ![](/p.gif) | IP-MAC-Port binding | Yes | ![](/p.gif) | Authentication | Port-based authentication | Power over Ethernet (PoE) | Power over Ethernet (PoE) | Yes | ![](/p.gif) | Power over Ethernet (PoE) ports quantity | 4 | ![](/p.gif) | Power over Ethernet (PoE) power per port | 36 W | ![](/p.gif) | Total Power over Ethernet (PoE) budget | 150 W | Design | Product colour | Black | ![](/p.gif) | Housing material | Aluminium | ![](/p.gif) | Reset button | Yes | ![](/p.gif) | LED indicators | Yes | ![](/p.gif) | International Protection (IP) code | IP30 | ![](/p.gif) | Wall mountable | Yes | ![](/p.gif) | DIN rail mounting | Yes | ![](/p.gif) | Certification | FCC Part 15 Class A, CE | Performance | Firmware upgradeable | Yes | Optical fiber | Fiber ethernet cabling technology | 100BASE-X, 1000BASE-X | Weight & dimensions | Width | 107 mm | ![](/p.gif) | Depth | 72 mm | ![](/p.gif) | Height | 152 mm | ![](/p.gif) | Weight | 1150 g | Operational conditions | Operating temperature (T-T) | -20 - 75 °C | ![](/p.gif) | Storage temperature (T-T) | -40 - 85 °C | ![](/p.gif) | Operating relative humidity (H-H) | 5 - 95 % | ![](/p.gif) | Storage relative humidity (H-H) | 5 - 95 % | ![](/p.gif) | Heat dissipation | 563 BTU/h | Power | Input voltage | 48 - 56 V | ![](/p.gif) | Power consumption (typical) | 165 W | Data transmission | MAC address table | 8000 entries | ![](/p.gif) | Switching capacity | 8.8 Gbit/s | ![](/p.gif) | Store-and-forward | Yes | ![](/p.gif) | Number of queues | 8 | ![](/p.gif) | Jumbo frames support | Yes | ![](/p.gif) | Jumbo frames | 10000 | Network | Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z | ![](/p.gif) | Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T | ![](/p.gif) | Port mirroring | Yes | ![](/p.gif) | Full duplex | Yes | ![](/p.gif) | Flow control support | Yes | ![](/p.gif) | Link aggregation | Yes | ![](/p.gif) | Broadcast storm control | Yes | ![](/p.gif) | Rate limiting | Yes | ![](/p.gif) | Auto MDI/MDI-X | Yes | ![](/p.gif) | Spanning tree protocol | Yes | ![](/p.gif) | Auto-negotiation | Yes | ![](/p.gif) | VLAN support | Yes | ![](/p.gif) | Virtual LAN features | Private VLAN, Tagged VLAN, Protocol-based VLAN | ![](/p.gif) | Number of VLANs | 4094 | Ports & interfaces | Basic switching RJ-45 Ethernet ports quantity | 2 | ![](/p.gif) | Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) | ![](/p.gif) | Gigabit Ethernet (copper) ports quantity | 2 | ![](/p.gif) | SFP module slots quantity | 2 | ![](/p.gif) | Fiber optic connector | SFP | ![](/p.gif) | Console port | RJ-45 | Logistics data | Harmonized System (HS) code | 85176990 | Multicast features | Multicast support | Yes | ![](/p.gif) | Number of multicast groups filtered | 256 | Management features | Switch type | Managed | ![](/p.gif) | Switch layer | L2 | ![](/p.gif) | Quality of Service (QoS) support | Yes | ![](/p.gif) | Web-based management | Yes | ![](/p.gif) | Traffic classification | Yes | ![](/p.gif) | ARP inspection | Yes | ![](/p.gif) | System event log | Yes | ![](/p.gif) | MIB support | RFC 1213 MIB-II, RFC 1215 Generic Traps, RFC 1493 Bridge MIB, RFC 2674 Bridge MIB Extensions, RFC 2737 Entity MIB (Version 2), RFC 2819 RMON (1, 2, 3, 9), RFC 2863 Interface Group MIB, RFC 3635 Ethernet-like MIB |
|