Next Green Polebox 320 D

Next Green Polebox320 D is a tube or pole mount for EVcharging boxes for mounting on a 60 mm steel tube or pole.

Polebox makes it easy, for example when changing from engine heater location to charging location and can therefore be used to replace an engine heater hood. The product is intended for feeding electrical cables inside the tube or pole. Polebox has a built-in distribution terminal for up to 2 x 5G25 mm2 power cable for extending the connection to the next charging post. From the distribution terminal in the Polebox, the respective charging box is then connected using a 5G2.5 mm2 rubber cable.

Polebox comes with a DIN rail to mount RCCB/RCBO and can be equipped with an additional DIN rail for units such as a Wi-Firouter or a 3G/4G modem or power supply. Everything fits neatly inside the box. Poleboxis made of Swedish steel and powder coated to provide the highest quality.
Polebox is made to fit many different charger models. Mounting holes for each charger are drilled upon installation.

Polebox is very easy to install. It is prepared indoors by mounting the EV-chargers and installing the wiring from the distribution terminal. Polebox is then put in place outside on the existing steel tube and the charger hood is lifted and fastened. This provides easy to access for screwing supply wires into the distribution terminal.

Suitable for larger charging boxes with a maximum hole pattern width of 320 mm and 540 mm height.