Polycell One Coat Damp Seal 500 ml

Performance

Recoat after

24 h

Recoat after note

Allow to dry fully before overcoating (overnight)

Drying time

4 h

Drying time note

Depending on conditions

Logistics data

Layers per pallet

9 pc(s)

Weight & dimensions

Sealant volume

500 ml

Features

Suitable for indoor use

Yes

Number of coats

1

Surface preparation

Cover furniture and carpets. Make sure the surface is clean, dry and free from loose particles and mould. Remove any wallpaper or loose paint. Fill holes or cracks with an appropriate Polycell Polyfilla and sand down well. Polycell Damp Seal is not a cure for damp, which should always be trated at source before applying, and is not suitable for use against rising damp. Polycell Damp Seal should not be used at ground level, where efflorescent salts are present, or where condensation is a problem.

How to use

1) Allow new plaster to dry for at least 1 to 2 weeks before using this product. 2) Stir the product well. Do not thin. 3) Apply the product generously with a brush or roller to damp but not saturated surfaces working well over the affected area and a wide surrounding area, while avoiding runs. 4) Avoid splashing on polystyrene tiles or any plastic materials. 5) Allow to dry fully before overcoating (overnight). 6) Treated surfaces are now ready to decorate. 7) Drying of wall coverings, especially vinyl coverings may be slowed.

Tool cleaning

Remove excess product from tools before cleaning with Polycell Brush Cleaner

How to store

Do not use or store in extremes of temperature and protect from frost

Packaging data

Package width

90 mm

Package depth

90 mm

Package height

100 mm