Polycell Plaster Repair is ideal for repairing large areas of damaged plaster. Specially ready mixed to a light consistency, it's much easier to apply and smooth out than ordinary plaster. It gives a smooth 'ready to decorate' finish to all masonry surfaces and will not slump, shrink or crack. More information: Features | Product form | Base | ![](/p.gif) | Substance | Powder | ![](/p.gif) | Suitable for indoor use | Yes | ![](/p.gif) | Volume | 0.45 kg | ![](/p.gif) | Recoat after | 24 h | ![](/p.gif) | Drying time | 24 h | ![](/p.gif) | Drying time note | Depending on conditions | ![](/p.gif) | Volatile organic compounds (VOC) content | 1 g/l | ![](/p.gif) | Volatile organic compounds (VOC) content labelling system | Minimal (0 - 0.29%) | ![](/p.gif) | Surface preparation | Ensure surface is sound and free of loose material. Touch in nails and screw heads with a suitable metal primer and ensure all wiring is insulated and isolated. | ![](/p.gif) | How to use | 1) Stir to a smooth consistency. 2) Apply with a filling tool: a filling knife, trowel or float, with random sweeping strokes. 3) Gently smooth off with a clean, wet tool, cleaning and wetting between strokes. Alternatively use a length of straight wooden batten. 4) Once surface is firm but before it dries hard, re-wet and polish with a clean tool for a smooth finish. 5) Allow at least 24 hours to dry (several days for deeper repairs). Sand smooth if necessary. | ![](/p.gif) | Tool cleaning | Replace lid firmly to stop product drying out when storing.Remove excess filler from tools before cleaning in warm water. | ![](/p.gif) | How to store | Replace lid firmly to stop product drying out when storing | Packaging data | Package width | 100 mm | ![](/p.gif) | Package depth | 50 mm | ![](/p.gif) | Package height | 170 mm | Logistics data | Layers per pallet | 5 pc(s) |
|