| |
|
| Item number: CIEN9-59331767 Manufacturer no.: 5084783 EAN/GTIN: 5011867203133 |
| |
|
| | |
| Hammerite Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one More information: Features | Product type | (2-in-1) Paint & primer | | Suitable for outdoor use | Yes | | Best uses | Fence, Furniture | | Finish type | Hammer finish | | Paint volume | 0.4 L | | Colour name | Silver | | Composition | Solvent-based | | Volatile organic compounds (VOC) content | 399 g/l | | Volatile organic compounds (VOC) content labelling system | Very high (>50%) | | Coverage per pack | 0.5 m² | | Minimum drying time | 1 h | | Maximum drying time | 2 h | | Recoat after | 0.25 h | | Number of coats (min) | 3 | | Number of coats (max) | 4 | | Rust protection | Yes | | Dispenser type | Spray | | Protection term | 8 year(s) | | Surface preparation | Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush. Remove dirt, dust and grease with diluted detergent.Remove grease with Hammerite Brush Cleaner & Thinners. Then rinse with clean water and allow time to dry.Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for at least 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface. If there is a reaction remove all paint from the surface. On bare zinc, aluminium and galvanised surfaces; apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint | | How to use | Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes .Apply light even coats, from a distance of approximately 15cm (6 inches) and keep the aerosol moving. Do NOT concentrate spray in one spot. Apply 3-4 coats for maximum protection and allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages | | HSE note | Flame, Exclamation mark Danger Contains acetone Extremely flammable aerosol. Causes serious eye irritation. May cause drowsiness or dizziness. Pressurized container: may burst if heated.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains 2-butanone oxime. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking. | Other features | Suitable for materials | Metal | Packaging data | Package width | 64 mm | | Package depth | 64 mm | | Package height | 199 mm | | Package weight | 470 g | Logistics data | Master (outer) case width | 200 mm | | Master (outer) case height | 200 mm | | Layers per pallet | 4 pc(s) |
|
| | |
| | | |
| Other search terms: Color sprays, Marker spray, Marker sprays, Marking spray, Marking sprays, Acrylic paint spray, Acrylic paint sprays, Enamel aerosol, Lacquer spray, Lacquer sprays, Spray paint, Model building spray, Model building sprays, Anti-corrosion paint, Anti corrosive paint, Anticorrosive paint, Anti rust paint, Anti-rust paint, Rust protection paint, Galvanised metal paint, Rust metal paint, anti corrosive paint |
| | |
| |