Hammerite Radiator Enamel Satin Aerosol 0.4 L

Features

Product type

Paint

Suitable for indoor use

Yes

Best uses

Metal

Finish type

Satin

Paint volume

0.4 L

Colour name

White

Suitable location

Bathroom, Bedroom, Children's room, Dining room, Hallway, Home office, Kitchen, Living room

Surface coverage

0.5 m²/L

Composition

Solvent-based

Volatile organic compounds (VOC) content

499 g/l

Volatile organic compounds (VOC) content labelling system

High (25 - 50%)

Minimum drying time

1 h

Maximum drying time

2 h

Recoat after

0.25 h

Number of coats (min)

3

Number of coats (max)

4

Dispenser type

Spray

Surface preparation

All surfaces must be clean, dry and free from rust, flaking paint, dirt, dust and grease. Rub down all painted surfaces with abrasive paper. Radiators must be turned off and only painted when cold. Mask off the surrounding area to protect from overspray

How to use

Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6"), and keep the aerosol moving. Do not concentrate spray on one spot. When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats. Do not overspray as sagging may occur if excessive paint is applied. Between coats invert can and spray for 2 seconds to avoid blockages.

HSE note

Flame, Exclamation mark Danger Contains acetone Extremely flammable aerosol. Pressurized container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use.IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F.Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains phthalic anhydride and 2-butanone oxime. May produce an allergic reaction.Repeated exposure may cause skin dryness or cracking.

Other features

Suitable for materials

Metal

Packaging data

Package width

64 mm

Package depth

64 mm

Package height

199 mm

Package weight

400 g

Logistics data

Master (outer) case width

200 mm

Master (outer) case height

200 mm

Layers per pallet

4 pc(s)