Hammerite Special Metal Primer 0.5 L

Logistics data

Layers per pallet

9 pc(s)

Weight & dimensions

Primer volume

0.5 L

Packaging data

Package width

100 mm

Package depth

100 mm

Package height

90 mm

Package weight

710 g

Features

Suitable for indoor use

Yes

Suitable for outdoor use

Yes

Best uses

Fence, Furniture

Suitable for materials

Metal

Colour name

Red

Composition

Water-based

Finish type

Matt

Surface coverage

16 m²/L

Volatile organic compounds (VOC) content labelling system

Low (0.3 - 7.99%)

Drying time

0.5 h

Recoat after

2 h

Number of coats

2

Surface preparation

All surfaces must be clean and dry. Remove loose rust, flaking paint and the gloss from old paintwork by wire brushing and/or rubbing down with coarse abrasive paper. Treat any rusted patches with Hammerite Kurust. Degrease thoroughly with a detergent solution then rinse thoroughly with clean water and allow to dry

How to use

Stir paint thoroughly. Do not apply when there is a risk of rain, frost or if the temperature falls below 5°C. Hammerite Special Metals Primer is touch dry in 30 minutes (depending on weather conditions) and can be overcoated after only 2 hours. Hammerite Special Metals Primer can be overcoated with most paints.

Tool cleaning

After use, remove as much paint as possible from brushes before cleaning with clean water. Do not use or store in extreme temperature and protect from frost

HSE note

Keep out of reach of children. If medical advice is needed, have product container or label at hand. Do not get in eyes, on skin, or on clothing. Call a POISON CENTER or doctor if you feel unwell. Dispose of contents and container in accordance with all local, regional, national or international regulations.Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.