 | | | | |
Picture | | | | Order |
|
|
|
|
|
from £ 6.41*
per piece |
|
|
|
|
from £ 17.40*
per piece |
|
|
|
|
£ 2.83*
per piece |
|
|
|
|
£ 59.58*
per pack |
|
|
Trend 3/08 x 1/2 TCT Two Flute Cutter 12.7 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 27.14*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A1701.1/4 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 1.2500" (1.1/4) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 103.102*
per piece |
|
|
|
|
from £ 1.51*
per piece |
|
|
End Mill C24712.0 (1 offer) Short series end mill with 4 flutes, diameter 12mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
from £ 59.662*
per piece |
|
|
|
|
£ 3.48*
per piece |
|
|
|
|
from £ 0.446*
per piece |
|
|
|
|
£ 30.24*
per piece |
|
|
Trend 3/08 x 1/4 TCT Two Flute Cutter 12.7 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 27.14*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A1701.1/8 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 1.1250" (1.1/8) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 82.701*
per piece |
|
|
|
|
from £ 1.55*
per piece |
|
|
End Mill C2472.0 (1 offer) Short series end mill with 4 flutes, diameter 2mm with 7mm length of cut and 51mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
from £ 37.45*
per piece |
|
|
