 | | | | |
Picture | | | | Order |
|
|
|
|
|
£ 3.02*
per piece |
|
|
Bosch HSS Twist Drill Bits PointTeQ (1 offer) HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design - Increased drilling rate generates less heat and wear - PointTeQ tip design remains sharp and ensures continu... |
|
from £ 16.686*
per piece |
|
|
|
|
£ 26.58*
per piece |
|
|
|
|
from £ 6.13*
per piece |
|
|
|
|
from £ 1.16*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A1701.1/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 1.0313" (1.1/32) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with st... |
|
from £ 63.806*
per piece |
|
|
|
|
from £ 270.057*
per piece |
|
|
|
|
£ 2.83*
per piece |
|
|
Tungsten carbide pilot drill bit 120 (1 offer) Tungsten carbide pilot drill bit 120; Tungsten carbide pilot drill bit for holesaws with cutting capacity <60 mm; with 1/4" hex shank, 118° drill bit tip. Centred, special multi-purpose diamond-gro... |
|
from £ 7.97*
per piece |
|
|
|
|
£ 59.58*
per pack |
|
|
|
|
from £ 1.36*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A1701.1/4 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 1.2500" (1.1/4) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 95.892*
per piece |
|
|
End Mill C27310.0 (1 offer) Long series end mill with 4 flutes, diameter 10mm with 45mm length of cut, 95mm overall length and 54.5mm reach with neck relief, according to DIN 844 L standard with a 10mm Weldon shank, powder me... |
|
from £ 55.87*
per piece |
|
|
|
|
£ 3.48*
per piece |
|
|
|
|
from £ 0.396*
per piece |
|
|
