| | | | |
Picture | | | | Order |
|
|
|
End Mill C2735/8 (1 offer) Long series end mill with 4 flutes, diameter 5/8" with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
from £ 98.579* per piece |
|
|
|
|
from £ 83.556* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17015.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 15mm with an overall length of 156mm and flute length of 83mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 31.38* per piece |
|
|
End Mill C27315.0 (1 offer) Long series end mill with 4 flutes, diameter 15mm with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
from £ 96.969* per piece |
|
|
|
|
from £ 11.36* per 10 pieces |
|
|
End Mill S90420.0 (1 offer) Regular length end mill with 4 flutes, diameter 20mm with 38mm length of cut, 104mm overall length and 0.3mm 45° chamfered corner edges, according to DORMER standard with a 20mm plain shank, solid ... |
|
from £ 133.749* per piece |
|
|
Bosch 2609255022 (1 offer) The high-performance universal drill bit. A robust twist drill bit made of high speed steel; high elasticity and low risk of breakage thanks to hot-moulding production method. Universally suitable ... |
|
from £ 1.68* per piece |
|
|
|
|
from £ 26.50* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17015/16 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.9375" (15/16) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 55.733* per piece |
|
|
End Mill C27318.0 (1 offer) Long series end mill with 4 flutes, diameter 18mm with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
from £ 111.815* per piece |
|
|
Taper Shank Drill A13014.0 (3 offers) Jobber length drill with taper shank, diameter 14mm with an overall length of 189mm and flute length of 108mm according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered ... |
|
from £ 23.92* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17016.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 16mm with an overall length of 157mm and flute length of 84mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 31.79* per piece |
|
|
End Mill C27316.0 (1 offer) Long series end mill with 4 flutes, diameter 16mm with 63mm length of cut, 123mm overall length and 74.5mm reach with neck relief, according to DIN 844 L standard with a 16mm Weldon shank, powder m... |
|
from £ 98.479* per piece |
|
|
Taper Shank Drill A13016.0 (3 offers) Jobber length drill with taper shank, diameter 16mm with an overall length of 218mm and flute length of 120mm according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered ... |
|
from £ 28.80* per piece |
|
|
End Mill C24718.0 (1 offer) Short series end mill with 4 flutes, diameter 18mm with 32mm length of cut, 92mm overall length and 43.5mm reach with neck relief, according to DIN 844 K standard with a 16mm Weldon shank, powder m... |
|
from £ 90.087* per piece |
|
|