The SEM310X HART (generic device) temperature transmitter is a universal device approved to ATEX, IECEX and UKEX for hazardous areas. It accepts most commonly used Pt100, thermocouple, mV , potentiometer sensors and generates an industry standard (4 to 20) mA transmission signal. Compatible to HART 5, 6, or 7 the product can be easily programmed using our free USB Speedlink software and a standard USB lead (safe area version). It can also be programmed via a HART communication device / system. Isolation is a standard feature to overcome any potential ground loop effects and a sensor referencing facility enables the transmitter to be calibrated to a particular sensor. This HART temperature transmitter has two inputs. This allows the connection of two sensors. Maths functions such as difference, average, highest, lowest, sensor redundancy (TC and mV only) are available. The math function of both inputs is then reflected in the 4 to 20mA output. More information: ![](/p.gif) | ![](/p.gif) | Feature Highlights 1: | Dual RTD, Thermocouple, Potentiometer and mV Inputs | Feature Highlights 2: | ATEX, IECEx UKEX Approved for Hazardous areas | Feature Highlights 3: | Isolated Input to Output 4kV DC Flash Tested | Feature Highlights 4: | Maths Functions Between Inputs | Feature Highlights 5: | SIL 2 Hardware Safety Integrity |
|