 | | | | |
Picture | | | | Order |
|
|
|
End Mill C24714.0 (1 offer) Short series end mill with 4 flutes, diameter 14mm with 26mm length of cut, 83mm overall length and 37.5mm reach with neck relief, according to DIN 844 K standard with a 12mm Weldon shank, powder m... |
|
from £ 71.141*
per piece |
|
|
|
|
from £ 21.31*
per piece |
|
|
Trend 3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 26.50*
per piece |
|
|
End Mill S90414.0 (1 offer) Regular length end mill with 4 flutes, diameter 14mm with 30mm length of cut, 83mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 14mm plain shank, solid c... |
|
from £ 70.009*
per piece |
|
|
|
|
from £ 21.18*
per piece |
|
|
Trend 3/5 x 1/4 TCT Two Flute Cutter 9.0 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 26.50*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17013/16 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.8125" (13/16) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 43.364*
per piece |
|
|
End Mill S90416.0 (1 offer) Regular length end mill with 4 flutes, diameter 16mm with 32mm length of cut, 92mm overall length and 0.2mm 45° chamfered corner edges, according to DORMER standard with a 16mm plain shank, solid c... |
|
from £ 90.272*
per piece |
|
|
|
|
from £ 5.07*
per piece |
|
|
|
|
from £ 32.04*
per piece |
|
|
Trend 3/50 x 1/4 TCT Two Flute Cutter 9.5 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 28.55*
per piece |
|
|
1/2" Reduced Parallel Shank Drill A17014.0 (3 offers) Standard length drill with 1/2" reduced straight shank, diameter 14mm with an overall length of 156mm and flute length of 83mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 26.91*
per piece |
|
|
End Mill C24716.0 (1 offer) Short series end mill with 4 flutes, diameter 16mm with 32mm length of cut, 92mm overall length and 43.5mm reach with neck relief, according to DIN 844 K standard with a 16mm Weldon shank, powder m... |
|
from £ 84.657*
per piece |
|
|
|
|
from £ 110.484*
per piece |
|
|
|
|
from £ 42.34*
per piece |
|
|
