| | | | |
Picture | | | | Order |
|
|
|
1/2" Reduced Parallel Shank Drill A17025.0 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 25mm with an overall length of 159mm and flute length of 83mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 56.711* per piece |
|
|
End Mill S9043.0 (1 offer) Regular length end mill with 4 flutes, diameter 3mm with 12mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid ca... |
|
from £ 15.498* per piece |
|
|
|
|
from £ 6.32* per piece |
|
|
Trend 4/5 x 1/2 TCT Two Flute Cutter 19.1 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 39.42* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17025/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7813" (25/32) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 42.969* per piece |
|
|
End Mill C2471/4 (1 offer) Short series end mill with 4 flutes, diameter 1/4" with 16mm length of cut and 66mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
from £ 52.716* per piece |
|
|
|
|
from £ 47.96* per piece |
|
|
Trend 4/5 x 1/4 TCT Two Flute Cutter 19.1 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 39.42* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17027/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.8437" (27/32) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 43.594* per piece |
|
|
End Mill C2735.0 (1 offer) Long series end mill with 4 flutes, diameter 5mm with 24mm length of cut and 68mm overall length, according to DIN 844 L standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
from £ 42.478* per piece |
|
|
|
|
from £ 13.87* per piece |
|
|
Trend 4/50 x 1/2 TCT Two Flute Cutter 19.1 x 37mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 47.56* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17029/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.9063" (29/32) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 60.853* per piece |
|
|
End Mill S9045.0 (1 offer) Regular length end mill with 4 flutes, diameter 5mm with 16mm length of cut, 50mm overall length and 0.13mm 45° chamfered corner edges, according to DORMER standard with a 5mm plain shank, solid ca... |
|
from £ 19.255* per piece |
|
|
|
|
from £ 7.52* per piece |
|
|