| | | | |
Picture | | | | Order |
|
|
|
Trend 3/83M x 1/2 TCT Two Flute Cutter 12.7 x 50mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 37.46* per piece |
|
|
End Mill C2473.5 (1 offer) Short series end mill with 4 flutes, diameter 3.5mm with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
from £ 35.818* per piece |
|
|
|
|
from £ 3.03* per piece |
|
|
|
|
from £ 22.07* per piece |
|
|
|
|
from £ 46.15* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17019.5 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 19.5mm with an overall length of 158mm and flute length of 81mm according to DORMER standard with 118° point angle, HSS with steam t... |
|
from £ 39.045* per piece |
|
|
End Mill C24720.0 (1 offer) Short series end mill with 4 flutes, diameter 20mm with 38mm length of cut, 104mm overall length and 53.5mm reach with neck relief, according to DIN 844 K standard with a 20mm Weldon shank, powder ... |
|
from £ 113.971* per piece |
|
|
|
|
from £ 3.03* per piece |
|
|
|
|
from £ 28.79* per piece |
|
|
Trend 3/8L x 1/4 TCT Two Flute Cutter 12.0 x 19mm (4 offers) Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be ... |
|
from £ 29.59* per piece |
|
|
Trend 4/08 x 1/4 TCT Two Flute Cutter 25.4 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 42.77* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17019/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.5938" (19/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 28.68* per piece |
|
|
End Mill C24725.0 (1 offer) Short series end mill with 5 flutes, diameter 25mm with 45mm length of cut, 121mm overall length and 64.5mm reach with neck relief, according to DIN 844 K standard with a 25mm Weldon shank, powder ... |
|
from £ 187.733* per piece |
|
|
|
|
from £ 3.78* per piece |
|
|
|
|
from £ 41.97* per piece |
|
|