| | | | |
Picture | | | | Order |
|
|
|
Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0 x 25mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 46.37* per piece |
|
|
End Mill C2473/16 (1 offer) Short series end mill with 4 flutes, diameter 3/16" with 13mm length of cut and 57mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
from £ 38.286* per piece |
|
|
|
|
from £ 3.78* per piece |
|
|
|
|
from £ 50.32* per piece |
|
|
Trend 4/1 x 1/4 TCT Two Flute Cutter 15.0 x 25mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 46.37* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17021.0 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 21mm with an overall length of 158mm and flute length of 82mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 63.30* per piece |
|
|
End Mill C2474.5 (1 offer) Short series end mill with 4 flutes, diameter 4.5mm with 11mm length of cut and 55mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
from £ 37.836* per piece |
|
|
|
|
from £ 4.32* per piece |
|
|
|
|
from £ 56.77* per piece |
|
|
Trend 4/2 x 1/2 TCT Two Flute Cutter 16.0 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 34.63* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17021/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6563" (21/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 32.043* per piece |
|
|
End Mill C2472.0 (1 offer) Short series end mill with 4 flutes, diameter 2mm with 7mm length of cut and 51mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
from £ 36.87* per piece |
|
|
|
|
from £ 4.86* per piece |
|
|
|
|
from £ 86.11* per piece |
|
|
Trend 4/2 x 1/4 TCT Two Flute Cutter 16.0 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 29.19* per piece |
|
|