| | | | |
Picture | | | | Order |
|
|
|
|
|
£ 30.24* per piece |
|
|
|
|
from £ 1.36* per piece |
|
|
1/2" Reduced Parallel Shank Drill A1701.1/8 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 1.1250" (1.1/8) with an overall length of 6" and flute length of 3" according to DORMER standard with 118° point angle, HSS with ste... |
|
from £ 75.181* per piece |
|
|
End Mill C27312.0 (1 offer) Long series end mill with 4 flutes, diameter 12mm with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
from £ 65.496* per piece |
|
|
|
|
£ 3.66* per piece |
|
|
|
|
from £ 5.02* per piece |
|
|
|
|
£ 18.14* per piece |
|
|
|
|
from £ 1.42* per piece |
|
|
End Mill C2731/2 (1 offer) Long series end mill with 4 flutes, diameter 1/2" with 53mm length of cut, 110mm overall length and 64.5mm reach with neck relief, according to DIN 844 L standard with a 12mm Weldon shank, powder m... |
|
from £ 87.447* per piece |
|
|
|
|
£ 4.67* per piece |
|
|
|
|
from £ 26.40* per piece |
|
|
|
|
from £ 1.52* per piece |
|
|
End Mill C27311.0 (1 offer) Long series end mill with 4 flutes, diameter 11mm with 45mm length of cut and 102mm overall length, according to DIN 844 L standard with a 12mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
from £ 72.74* per piece |
|
|
|
|
from £ 3.77* per piece |
|
|
|
|
from £ 1.67* per piece |
|
|