![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) |
Picture | | | | Order |
![](/p.gif) |
|
|
Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0 x 25mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 45.43* per piece |
|
|
End Mill C2473.5 (1 offer) Short series end mill with 4 flutes, diameter 3.5mm with 10mm length of cut and 54mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
from £ 33.078* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17021/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.6563" (21/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 29.763* per piece |
|
|
Trend 4/1 x 1/4 TCT Two Flute Cutter 15.0 x 25mm (4 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 45.67* per piece |
|
|
End Mill C2472.0 (1 offer) Short series end mill with 4 flutes, diameter 2mm with 7mm length of cut and 51mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright fin... |
|
from £ 34.47* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17022.0 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 22mm with an overall length of 158mm and flute length of 82mm according to DORMER standard with 118° point angle, HSS with steam tem... |
|
from £ 40.604* per piece |
|
|
Trend 4/2 x 1/2 TCT Two Flute Cutter 16.0 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 33.95* per piece |
|
|
End Mill S9043.0 (1 offer) Regular length end mill with 4 flutes, diameter 3mm with 12mm length of cut, 38mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 3mm plain shank, solid ca... |
|
from £ 14.098* per piece |
|
|
Trend 4/2 x 1/4 TCT Two Flute Cutter 16.0 x 19mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 28.73* per piece |
|
|
End Mill C2475.5 (1 offer) Short series end mill with 4 flutes, diameter 5.5mm with 13mm length of cut and 57mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
from £ 38.943* per piece |
|
|
1/2" Reduced Parallel Shank Drill A17023/32 (1 offer) Standard length drill with 1/2" reduced straight shank, diameter 0.7188" (23/32) with an overall length of 6" and flute length of 3.1/8" according to DORMER standard with 118° point angle, HSS with... |
|
from £ 33.189* per piece |
|
|
Trend 4/24 x 1/2 TCT Two Flute Cutter 15.9 x 63mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 57.31* per piece |
|
|
End Mill C2474.5 (1 offer) Short series end mill with 4 flutes, diameter 4.5mm with 11mm length of cut and 55mm overall length, according to DIN 844 K standard with a 6mm Weldon shank, powder metallurgical HSS-E with bright ... |
|
from £ 35.326* per piece |
|
|
Trend 4/29 x 1/2 TCT Two Flute Cutter 18.0 x 25mm (3 offers) Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abr... |
|
from £ 40.12* per piece |
|
|
End Mill S9044.0 (1 offer) Regular length end mill with 4 flutes, diameter 4mm with 14mm length of cut, 50mm overall length and 0.08mm 45° chamfered corner edges, according to DORMER standard with a 4mm plain shank, solid ca... |
|
from £ 16.099* per piece |
|
|